100kw pitch controlled wind turbine adoptsPassive electric pitch controlled , tailless wind turbineThe wind turbine has Anemometer Controller will adjust wind turbine direction through theanemometer dataController will test the rotation speed . Once the rotation speed is too higher , itush the bladeangle twist and change itself aerodynamic characteristic to control wind turbine rotation speedthe blades direction same with the wind direction and stop working . This will make the generatoroutput power steady and constant
100kw variable pitch wind turbine | |||
Brand | GROWTH | Model | FD24-100kw |
Rated output power | 100KW | Max output power | 60kw |
Rated wind speed | 13m/s | Blades number | 3 |
Start up wind speed | 3m/s | Blades material | FRB |
Single blades length | 11.5m | Single blades weight | 425kgs |
Working wind speed | 3.0-25m/s | Blades rotor diameter | 23.85m |
Survival wind speed | 30m/s | Speed regulated method | Variable pitch |
Start up torque | 100N.m | Stop method | Variable pitch |
working voltage | 0-700vdc | Generator type | 3 phase AC PMA |
Rated rotation speed | 100rpm | Generator and rotor body weight | 6500KGS |
Hub diameter | 0.85m | Wind turbine weight | 7800KGS |
Certification | CE | Rated working voltage | 530V |
Technology: VIA foaming
Material : Fiberglass reinforced polyester
Resin: American Ashland brand
Special blades paint for wind turbine blade
Protective film
acumme infusion technology, without bubble, high strength , light weight
Blade position sensor for pitch control
Type: 3 phase AC permanent magnet generator, 48 poles
Rating: 100KW 700VDC
Generator: Permanent magnet (Nd-Fe-B) 38SH
Superior grade bearings (NSK,SKF), long-term grease, run 30000 hours without maintenance
Advantage: electric pitch control
Anemometer on wind turbine supply the information of wind speed / wind direction to PLCPLC sends pitch / yawing / brake signalElectric drive pusher for variable pitchWorm wheel for yawingBrake motor for electric brake